Target Tees with Clamp Connectors
Target tees with integral clamp-type hub ends for erosion protection at flowline direction changes. A duplex tee body and blind hub contain replaceable sacrificial cushion material, with metal seal ring and clamp set.
- Sacrificial cushion protects the impingement zone from sand erosion
- Clamp-hub closure enables fast cushion replacement
- Service access without cutting the pipe
- Pressure containment to the approved full design rating
- Duplex wetted construction
- Inspection and replacement intervals matched to operating duty
Target tees with integral clamp-type hub ends for erosion protection at flowline direction changes. A duplex tee body and blind hub contain replaceable sacrificial cushion material, with metal seal ring and clamp set. Meritus Technology is a supplier in China and sourcing partner for pressure-containing oil & gas production piping equipment. Standards: ASME VIII, API 6A, NACE MR0175 / ISO 15156. Confirm design code, material, pressure–temperature envelope, fluid composition, corrosion/erosion allowance and connection interfaces before manufacture. Approval and registration status relates to the relevant manufacturing partner, product scope and purchasing entity; project-specific evidence and current validity are confirmed at quotation. These references do not imply that every product is approved by every listed organization or that Meritus holds direct approvals.
Supplied through oil-operator-approved manufacturing partners — vendor registrations include Aramco, ADNOC, PTTEP, ONGC, Chevron, Shell, TotalEnergies; EPC approvals include EIL, L&T, TechnipFMC, KBR (full list on the category page). Approvals & Client Base
Certifications & Standards
Industries Served
Key Advantages
Warranty: As agreed in the quotation and contract
Service Life: Depends on duty, environment and maintenance
Maintenance: Based on service conditions, inspection findings and the equipment-specific maintenance procedure
Supplied through oil-operator-approved manufacturing partners — vendor registrations include Aramco, ADNOC, PTTEP, ONGC, Chevron, Shell, TotalEnergies; EPC approvals include EIL, L&T, TechnipFMC, KBR (full list on the category page). Approvals & Client Base
Preparation Requirements
Review approved drawings, pressure–temperature ratings, fluid compatibility, inspection records and site permits. Isolate, depressurize, drain and verify zero stored energy before opening any pressure boundary.
Installation Steps
- 1Verify material identity, dimensions and pressure rating against the approved order
- 2Inspect sealing faces, screens, cushions or closure parts as applicable
- 3Align piping without forcing connections or introducing unapproved loads
- 4Fit the specified new seals and tighten fasteners in the approved sequence to the specified torque
- 5Check vents, drains, differential-pressure tappings and safety interlocks where fitted
- 6Complete the approved leak/pressure-test and commissioning procedure
- 7Record installation results and hand over maintenance instructions
Required Tools & Equipment
Certified lifting equipment, calibrated torque tools and project-approved alignment and pressure-test equipment.
Safety Requirements
Never loosen a connector or open a closure under pressure. Follow isolation, depressurization, gas testing and permit-to-work procedures.
Technical Support
Quotation-stage review of service conditions, drawings, codes, materials and manufacturing-partner approval requirements.
Field Service
Installation-support scope and site attendance agreed in the purchase order.
Training Programs
Equipment-specific handling, closure, screen/cushion replacement and maintenance guidance as applicable.
Documentation
Approved drawings, material certificates, weld traceability, NDT, pressure-test reports and project-specific approval evidence as ordered.